Yes Button Overview

Each button on the Yes Watch provides you with easy to use instructions...

M - Mode button is used to select which one of 5 modes to enter:

Setting HOME city - Setting AWAY city - SR/SS EVENT- Setting TIME - Stopwatch
Pushing M once will exit any mode and return to previous time display.

S - Set button is used for setting various data within different modes.

Single pushes advances one digit or letter at a time, holding S down scrolls selections forward fast.
S also activates daily functions and stops stopwatch.

B - Backlight/back scroll button works same as button S in setting modes,
      except backwards.

In daily functions B turns backlight on and dot matrix off.

L - Lock/alarm button locks settings done by buttons S and B in
      setting modes, activates and sets alarm functions, starts stopwatch
      and takes lap time.

C - Crown knob pulls out to adjust analog hand. Push in to engage hand.

Unfinished setting procedure defaults to previous time display if no buttons pushed for 30 seconds.
If your watch has not been set, battery is replaced or all 4 buttons pushed at once, HOME time defaults to Los Angeles and AWAY time to Paris, starting clock at Jan 1,2000.
If at the time of shipping we knew were you lived or your preferences for HOME and AWAY cities we have set your watch for you, if not go to setting instructions.

+1.800.654.9548 - USA
+1.920.337.1640 - International
Contact Information
E-mail Information

World Watch | Contact | Display Systems | Nasdaq Ticker